This method is simple; It’s simply a matter of following the right local building codes. In particular, there are three areas in which aluminum frames have developed. If the wall plate does not run at the full height of the screw, lateral reinforcement may be required. Therefore, to correctly use the load/clamp tables in this tool, multiply the IBC 2012/ASCE 7-10 Design Wind Pressures by 0.6 (Reference Section 2.4 ASCE 7-10) before entering the load/clamp tables. Structural screws can be used in a variety of applications and designs. While most conditions require the expertise of a design professional, many systems can be selected based on tabular data or design tools.…